发布时间：2021-03-20 15:32:21 浏览次数：278
On March 15th,the 4th generation of high stress,high borosilicate 4.0 double chamber fireproof tempering furnace,developed and manufactured by Luoyang Gangxin Glass Technology Co.,Ltd.was officially put into operation in Wuhan Jingshun Science and Technology Development Co.,Ltd.
As everyone knows that the thinner glass is,more difficulty to be tempered,for the current market,the thinnest high stress fireproof glass is 5mm&the thinnest high borosilicate glass is 6mm.In addition to the thickness of the glass itself,the toughening of high stress fireproof glass is also limited by the width of the toughening equipment.The wider the equipment,the more difficult it is to produce high stress fireproof glass,so in the market,there is generally 2 meters wide equipment.
The fourth generation high stress and high borosilicate 4.0 double chamber fireproof tempering furnace of Luoyang Gangxin,which is located in Wuhan Jingshun Technology,has a width of 2.44m and can toughen high stress fireproof glass and high borosilicate 4.0 fireproof glass of 5mm and 6mm.It has not only achieved a breakthrough in the toughened thickness of fireproof glass,but also achieved a breakthrough in the toughened thickness of large plate with high borosilicate 4.0.According to Yang Changkun,general manager of Wuhan Jingshun Technology Development Co.,Ltd.,the furnace can process high borosilicate 4.0 fireproof glass with a maximum size of 2.44m×4.2m.
It is reported that the fireproof glass tempering furnace is the second fire-resistant glass tempering furnace provided by Gangxin for Jingshun Technology.The equipment has a wide processing range,in addition to tempering high stress fireproof glass and high borosilicate 4.0 fireproof glass,it can also tempering high quality building doors and Windows curtain wall toughened glass and single-silver,double-silver Low-E glass.The original fan combination mode,in the production of fireproof glass and ordinary glass,can be freely combined and switched,evenly distributed to the energy consumption per square glass to a minimum,which are multiple functions.
This double chamber fireproof furnace has achieved a breakthrough design of separated temperature zone.It not only solves the problem that the original equipment can only produce high borosilicate fireproof glass,but also realizes the high yield of high stress fireproof glass and high borosilicate 4.0 fireproof glass.According to Mr.Yang said,the capacity of the new equipment doubled on the basis of the original,the daily output of high stress fireproof glass can reach about 2000 square meters,the daily output of high borosilicate fireproof glass can also reach about 1200 square meters.
In addition,the new production of fireproof tempering furnace for the double-chamber tempering furnace,the production of fireproof glass in quality compare to the traditional fire-resistant tempering furnace production is much higher.This is also due to the fact that the fourth generation of high borosilicate 4.0 two-chamber fireproof tempering furnace adopts a new heating chamber design and upgrades the convection mode of average constant temperature,which ensures good glass imaging,light stress spot,uniform stress and low self-explosion rate.
The fourth generation of high stress,high borosilicate 4.0 double chamber high degree of intelligent fireproof glass tempering furnace,one key to automatic start all the way,the friendly man-machine interface,the clearly control principle,is beneficial to reduce the human error,and as a double chamber fireproof glass tempering furnace,the equipment can save manpower,and improve the efficiency of production,so the height of the Jingshun company endorsed.
Luoyang Gangxin glass technology co.,LTD.,as a committed to the toughened equipment research and development,design,manufacture and sale of 13 years company,as the building fire protection and fire fighting system in recent years a new test of building security glass,to further enhance the security of the architectural glass especially flameproof glass,fireproof,and integrity,after years of research and development to overcome technical challenges successfully launched high borosilicate 4.0 flameproof glass,high stress three with toughened glass and common glass furnace,become one of the first line enterprises of three apply of tempering furnace in China.
Gangxin fireproof glass tempering furnace installed in Wuhan Jingshun and successfully put into production,it is a strong combination of Gangxin company and first-class fireproof glass enterprises.Wuhan Jingshun company fireproof glass radiation in central China to speed up the market.It is more helpful to serve building fire prevention and build a demonstration base case of fireproof glass toughening furnace,further enhance the brand influence of Gangxin.